Categories

::: Kits :::
New Products Specials Featured Bestsellers HVAC Dollar Store PLUMBING 3D PRINTING ANTI-STATIC PRODUCTS PROJECT LEAD the WAY TEACHERS CLASSPACKS TRAINING-Ohm's Law DVD'S Educational Accessories Alarm/Automotive App Kits Alternative Energy Audio/Hi Fi Application and Kits Black Light Kits Batteries Breadboards CAMERAS/Infra-Red Calculators Car Kits Cases for Kits Cold Cathode Lamps Closed Circuit TV / CCTV Computer Accessories Components Computer Equipment Printer Cartridges Lego Consumer Products Educational Kits Electronic Project/Lab Kits Engino Kits Fiber Optic Kits/Equipment FUEL CELL KITS Geiger Kits Globes Home Application Kits Hexbugs Infrared/Laser Kits Interface Systems Kits Laser Kits/Infrared Learn to Solder Kits LED Kits Light Application Kits Magnifying Lamps Measuring Instrument Kits Microscopes Mini Soldering Kits Module Kits Mounted Kits/Assembled Multimeters (Assembled) Multimeter Kits MUSIC Non Soldering Kits Oscilloscopes OWI Robots Parallax Programming Products Power Supplies (Assembled) Power Supply Kits/Charger Kits Printed Circuit Products Quiz Bowl Kits Radio Kits Transmitters and Receivers Remote Control Unit Kits Robotic Arms Kits/Accessories Robotic Kits/Non Soldering Robot Kits - Soldering Safety Products Science Tech Discovery Planet Science Equipment and Toys Science/Physics/Spectrum Tubes Science Project/Lab Kits Season/Holiday Kits Security Products Snap Circuits Snooper Kits Software Solar Kits/Accessories Solder Soldering Equipment Soldering Kits in Cases Sound & Light Kits Strobe Light Kits Surface Mount Kits Test Equipment (Assembled) Test Equipment Kits Test Leads Thames and Kosmos Timer & Controller Kits Tools Tool Kits/Cases/Storage Toys Trainers/Microcontrollers Tree of Knowledge Velleman Products Video Application Kits Videos Wire/Cable Wooden Kits Xeltek Programmers

Omnitron Electronics

Toll Free:1-800-379-6664

Phone:954-574-0345

Fax: 954-574-9528

kitsusa@hotmail.com



Home » Parallax Programming Products

Product Details

View Larger Image  
Parallax 27983 Gas Sensor BoardA Blank Product
SKU: 27983
Our Price: $24.99
Quantity:

Overview

Product Details

Parallax 27983 Gas Sensor Board

 The Gas Sensor Board is designed to work in conjunction with one of the gas sensors listed below (not included) allowing you to determine when a preset gas level has been reached or exceeded.

  • CO (Carbon Monoxide) Gas Sensor (#605-00007)
  • CH4 (Methane) Gas Sensor (#605-00008)
  • LPG (Propane) Gas Sensor (#605-00009)
  • C2H5OH (Alcohol) Gas Sensor (#605-00011)

The gas sensor simply plugs into the Gas Sensor Board, making it easy to use these sensors in embedded projects. The board can interface to a microcontroller with only two I/O pins, allowing the sensor to be controlled and monitored automatically.

Key Features:

  • SIP header interface with 0.1" spacing for easy connection to prototyping boards or extension cables
  • Controllable internal heater facilitates accurate measurements
  • Low-power standby mode reduces power usage for embedded projects
  • Only two microcontroller I/O pins required for operation

Application Ideas:

  • Gas level over-limit alarm
  • Stand-alone/background sensing device
  • Environmental monitoring equipment

Specifications:

  • Voltage requirements: 5 VDC
  • Current requirements: ~165mA (heater on), ~60mA (heater off)
  • Interface: 1 TTL compatible input (HSW); 1 TTL compatible output (ALR)
  • Dimensions: 1.50 x 1.0 x 1.0 in (38.1 x 25.4 x 25.4 mm)
  • Operating temp range: 14 to 122 °F (-10 to +50°C)

Notes:
The Gas Sensor Board requires one of our sensors, a source of gas for calibration and a tiny flathead screwdriver.

The Gas Sensor Board is designed to work in conjunction with one of the gas sensors listed below (not included) allowing you to determine when a preset gas level has been reached or exceeded.

The gas sensor simply plugs into the Gas Sensor Board, making it easy to use these sensors in embedded projects. The board can interface to a microcontroller with only two I/O pins, allowing the sensor to be controlled and monitored automatically.

Key Features:

  • SIP header interface with 0.1" spacing for easy connection to prototyping boards or extension cables
  • Controllable internal heater facilitates accurate measurements
  • Low-power standby mode reduces power usage for embedded projects
  • Only two microcontroller I/O pins required for operation

Application Ideas:

  • Gas level over-limit alarm
  • Stand-alone/background sensing device
  • Environmental monitoring equipment

Specifications:

  • Voltage requirements: 5 VDC
  • Current requirements: ~165mA (heater on), ~60mA (heater off)
  • Interface: 1 TTL compatible input (HSW); 1 TTL compatible output (ALR)
  • Dimensions: 1.50 x 1.0 x 1.0 in (38.1 x 25.4 x 25.4 mm)
  • Operating temp range: 14 to 122 °F (-10 to +50°C)

Notes:
The Gas Sensor Board requires one of our sensors, a source of gas for calibration and a tiny flathead screwdriver.

The Gas Sensor Board and individual gas sensors replace the discontinued product numbers listed below. Please note that on boards labeled 27983 pin 2 is active-high, and on boards labeled 27904, 27930, 27931, and 27932, pin 2 is active-low.

  • #27983 + #605-00007 replaces #27931 – CO Gas Sensor Module
  • #27983 + #605-00008 replaces #27930 – CH4 Gas Sensor Module
  • #27983 + #605-00009 replaces #27932 – LPG Gas Sensor Module
  • #27983 + #605-00011 replaces #27904 – C2H5OH Gas Sensor Module

Downloads & Resources:
Gas Sensor Board Product Guide v1.0 (.pdf)
Gas Sensor Board Schematic Rev A (.pdf)
Gas Sensor Board Example Code (.zip)

Tell a Friend

Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Verification: (Reload Image)
 

Cart Contents

Your cart is currently empty
Subtotal: $0.00

Newsletter Signup

Receive New Product,
Updates & Science News

Email Address:

Order Info

TOLL FREE: 800-379-6664
INTERNATIONAL:954-574-0345

SCHOOL PURCHASE ORDERS:
FAX: 954-574-9528

INTERNATIONAL ORDERS:
MONEY ORDER,WESTERN UNION, OR BANK WIRE
(NOT INCL. CANADA)

Sale Item