Vex 278-1501 Competition Field Perimeter Kit

The official VEX Robotics Competition Field is setup on a foam surface, with a sheet-metal and lexan perimeter frame. Inside this perimeter, game-specific elements can be added.

• Metal frame for the VEX Robotics Competition field perimeter.
• Includes ALL parts required for frame assembly. (includes lexan)
• Also Includes two driver-control posts.
• Does NOT include Floor Tiles or Electronics.
• Modular and designed for easy assembly, disassembly, storage.
• Refer to the Border Documentation for more details.

Overview

The VEX Competition Field Perimeter is designed to provide a relatively low-cost high durability, modular field perimeter for use at a competition tournament. It consists of 12 modular panels, which once assembled can easily be stored or transported. These panels will not need to be disassembled, and are designed with locking hardware for long- term durability.

For assembly, these panels come with two types of gussets, one for joining two panels together linearly, and one for joining panels at a corner. These gussets come with built in lance and-slot features for easy alignment during assembly. All the assembly screws utilize pre-installed PEM Nuts, which greatly eases the assembly process. These screws are then easy to remove for field- breakdown and transport.

In some cases, a rigid perimeter wall isn’t important. Many robotics competitions can be held with a simple perimeter of tape laid out on the floor. However, there are some times when a full perimeter is desired. The following instructions will outline a lower-cost method of building a perimeter from PVC Pipe, and hardboard paneling which mimics the functionality of the VEX Competition Field Perimeter.

Free plans are available to build a Low Cost Alternative Field for around $100.