VM192IR is an infrared remote controlled RGB driver for 12 or 24 VDC LED strips. It allows you to set a colour manually or loop through all colours automatically, with 4 selectable fading speeds. A built-in dimmer allows the user to adjust the intensity, regardless of the chosen colour or mode.

Features

• includes one 4-channel infrared remote
• IR module can be placed up to 1 m away
• colour, intensity and mode are retained and will be restored after a power
  failure
• speed determined by jumper setting
• can also be used as a single channel led dimmer
• smooth manual scrolling through red-orange-yellow-green-blue-indigo-violet
  with up/down buttons
• fix a manually selected colour

Specifications

• power supply: 12..24 VDC
• current: 2.5 A/channel max. (30 W / 12 V, 60 W / 24 V max.)
• PWM frequency /resolution: 245 Hz, 10-bit
• intensity levels: 32
• colour loop time (R->G->B->R): 50 s, 1 min 40 s, 2 min 30 s, or 3 min 20 s
• max. ambient temp: 30 °C / 86 °F
• remote range: up to 10 m (fresh battery, line of sight, no interference)
• remote power supply: V23GA or GP23GAC 12 V battery (included)
• dimensions:
  • controller: 80 x 70 x 23 mm / 3.15 x 2.75 x 0.9"
  • remote: 88 x 37 x 13 mm / 3.46 x 1.45 x 0.5"